# niri and Dank Material Shell

Dictation on the [niri](https://github.com/YaLTeR/niri) Wayland compositor,
including sessions running Dank Material Shell (DMS). There is no
compositor-specific code: activation reuses the standard external triggers
over D-Bus, and the tray is the standard StatusNotifier item.

## Prerequisites

1. Install Voculinux first: [INSTALL.md](INSTALL.md).
2. Open **Settings → Shortcuts** and turn on **External Activation (Desktop
   Shortcut)**. The built-in key listener stops, and a running instance
   answers these triggers on the session bus (`com.voculinux.Voculinux`):

```bash
voculinux --toggle   # start if idle, stop if active
voculinux --start    # start voice typing
voculinux --stop     # stop voice typing
```

## Keybind: toggle once per press

Either paste the bind below into the `binds {}` section of
`~/.config/niri/config.kdl`, or copy the ready-made include file and
reference it (easier to keep across config edits):

```bash
mkdir -p ~/.config/niri
cp resources/niri/voculinux.kdl ~/.config/niri/voculinux.kdl
```

then near the top of `~/.config/niri/config.kdl`:

```kdl
include "~/.config/niri/voculinux.kdl"
```

The shipped bind:

```kdl
binds {
    Mod+Shift+M repeat=false hotkey-overlay-title="Toggle Voculinux dictation" {
        spawn "voculinux" "--toggle";
    }
}
```

`repeat=false` is what makes it toggle once per press: without it, holding
the key repeats the spawn and toggles dictation back off before you let go.
`Mod+Shift+M` was free in niri's stock binds and in Dank Material Shell's
binds when this was written. To use another key, check it first (below).
The bind's title shows in niri's hotkey overlay (`Mod+Shift+Slash`). The
include file's commented `--start` / `--stop` variants use `Mod+Shift+S` and
`Mod+Shift+X`, which were free in the same way.

A key is either a compositor bind or an in-app Voculinux shortcut —
never both. With External Activation on, do not keep the same key configured
under **Settings → Shortcuts**; with it off, remove the niri bind. A key
claimed on both sides fires twice: the compositor toggles over D-Bus while
the internal listener fires on its own.

## Check a key before you bind it

`niri validate` rejects a key bound twice inside one `binds {}` block, but
not a key bound in two blocks: a bind in your include file and one in
`dms/binds.kdl` both pass validation with no warning. So validation cannot
tell you whether a key is free. Check with grep, against your own config and
niri's stock binds. Run this before you copy the include file, or your own
toggle bind will match:

```bash
KEY_RE='(Mod|Super)\+Shift\+M([[:space:]{]|$)'   # the key you want to check
grep -rniE --include='*.kdl' "$KEY_RE" ~/.config/niri/
strings "$(command -v niri)" | grep -iE "^[[:space:]]*(//[[:space:]]*)?$KEY_RE"
```

Matching ignores case, because niri also accepts `mod+shift+m`. `strings`
comes from binutils. The first command searches your config. `~/.config/niri/` holds
`config.kdl` and the DMS-managed `dms/binds.kdl`, which `config.kdl`
includes. `--include='*.kdl'` skips the `binds.kdl.pre-*` backups. If you
include files from elsewhere, add their paths. The second command searches
the stock defaults embedded in the niri binary. Commented lines match too, so
a hit can be a bind you have commented out. No output from either command
means the key is free. For a hit, remove or move the other bind, because niri does not warn
about a key bound in two places. `Mod` and `Super` are both checked because
niri reads `Mod` as Super on a TTY.

## First dictation

There is no permission prompt on niri. The RemoteDesktop portal is never
used there, because no portal backend implements it, so your first dictation
types straight into the focused window through `wtype` with nothing to approve
or deny. Do not pin `portal` as a niri recommendation. IBus is excluded on
niri as well. The GNOME and KDE first-run behaviour is described in
[USER_GUIDE.md](USER_GUIDE.md#first-dictation-on-niri-gnome-and-kde).

## Hold-to-talk stays in the app

A compositor bind only sends the key press; it never sees the release, so
it can only toggle dictation. Push-to-talk (hold Right Alt, release to
stop) keeps working only through the built-in Voculinux shortcut. This
pack ships plain press binds only, so if you dictate with hold-to-talk,
leave the in-app shortcut in place for it and use the niri bind for toggle.

## Flatpak

`voculinux` is not on the host PATH from a sandbox, so bind the host D-Bus
call instead (same toggle, no extra sandbox spawned per press). The include
file carries a commented-out `gdbus` variant; background and the exact
command live under [Running without device
access](../packaging/flatpak/README.md#running-without-device-access).

## Tray under Dank Material Shell

Not yet observed on hardware: the StatusNotifier watcher bus name (or
names) DMS owns will be recorded with ticket #32, the hardware acceptance
run. The tray probe (`_check_status_notifier_watcher` in
`src/vocalinux/ui/tray_indicator.py`) currently accepts only
`org.kde.StatusNotifierWatcher`, and no probe code changed in this ticket.

The observation to record on #32, with a DMS session running:

```bash
busctl --user list | grep -i -E 'watcher|statusnotifier'
```

If DMS owns only `org.freedesktop.StatusNotifierWatcher`, the probe is
widened to accept both watcher names so no false missing-tray warning
appears, with behaviour tests covering both names. If
`org.kde.StatusNotifierWatcher` is present, the current probe stands and
the recorded output closes the question.